Home » Products » Hardware » Building Mechanical & Electrical Equipment » HVAC

D Head Nail Making Machine

Delivery term:The date of payment from buyers deliver within days

Price:
Negotiable
minimum:
Total supply:
Delivery term:
The date of payment from buyers deliver within days
seat:
Anhui
Validity to:
Long-term effective
Last update:
2020-11-07 14:01
Browse the number:
14747

Send an inquiries

+

Fine Fasteners Industry Co., Ltd

Contactaixin: Contactaixin: hefeifaai(Mr.): Email:
telephone:
phone:; Area:
Anhui
Address:
Room 1102, Unit 3, Building C7, Huishang Imperial Garden, Chaohu City, Hefei City, Anhui Province, China; Website:
http://www.ffifasteners.com/ http://hefeifaai.tomos-group.com/

+

Specification

MODEL	FFI-ZDJ-D90
Maximum Nail Diameter	3.5mm
Minimum Nail Diameter	2.0mm
Maximum Nail Length	90mm
Minimum Nail Length	45mm
Nail Making Speed	680pcs/min
Rated Power	7kw
Dimensions	1350mm1220mm1050mm
Machine Weight	2200kg

The advantage of clipped head nail making machine

The FFI-ZDJ-D90 high-speed nail-making machine adopts a square guide column structure in the middle, which effectively guarantees the performance and stability. The produced D shaped nails (commonly known as the paper strip nails) can perfectly solve the problems of length, burrs and other issues. The service life of wearing parts such as cutters can be greatly improved without any misoperation.

Common Faults and Solutions

Fault phenomenon	Reason	Solution
Uneven length of nails	The nail cutter is blunt and has serious burrs	Change the nail cutter
	Wire feeding click tooth surface gaps, 6mm adjustable bolt is pressed too closely	Adjust 6mm bolt upper side
	Click for wire back is too skew, Four pieces of alloy have worn out	Inspect and change
	Feeder is not going well	Tidy up the feeder
	The feed nozzle is blocked	Clean the feed nozzle
	Vice punch is out of the potholes and uneven	Take off and grind the punch
Clamp flat of nail shaft	Belt is misaligned	Adjust belt slider
	ring – shaped groove of nail dies isn't chamfered	Check and adjust in time
	Bending wire not corrected
	The upper guide pillar is too tight and prevents belt from running	Loosen the screw, move up guide rail so that there are gaps between belts
Different sizes of nail heads	thermal expansion and cold shrinkage
	Vice punch is out of the potholes and uneven	Take off and grind the punch
	Scissor is blunt and has serious burrs	Change the scissor
Out-of-round nail head	The nail die is broken	Change the nail die
	Large clamping gap of nail dies	Repair nail dies
	Wrong net angle	Repair net
	Bald head
There are stairs of nail heads	The nail head is out of round
	The right size
	Double heads	Adjust the vice punch to make nail head plump
Obvious camber in the clamp mark	Misalignment of belt and nail mold center	Adjust in time and check frequently
Stop	Lack of material	Rethread
	Wire knotted	Organize wires
	Lack of nail	Check the wire feed clip, press the start button after inching the probe
	Blockage of nails	Check nail bucket
	Inverter protection	Press the STOP button at the bottom right corner of the inverter
	wire feed slider overheating protection	Oil pump is short of oil, refuel in time
	the electric cabinet light is on, the motor doesn't run	With the punch against the nail, turn the manual wheel to turn the punch past the highest point
	Lack of material	Rethread
Can't turn on the machine	Manual wheel is not pulled out, electrical protection	Pull out the manual wheel

Site requirements for nail production equipment

The height of the workshop is more than 2.5 meters, the length is more than 22 meters, and the width is more than 6 meters (installed side by side). The above includes raw material storage, from production equipment to finished product, sorting, packaging, and storage.

Finished Product

Our After-Sale Service

● Make response on customers' inquiry or requirement within 12 hours.

● Assist customers to choose the most suitable machine, give them professional suggestion.

● Schedule machine production by our skilled team according to customers' demands.

● Offer customers manual instruction or video for machine to help them operate machine correctly.

● Provide customer layout of workshop with machine to help them complete the machine installation.

● Assign engineer to assist customer to install machine if necessary.

● Offer one year guarantee for concrete nail making machine.

● Offer spare parts to customer no matter whether in guarantee or not as soon as we get feedback from customer.

http://www.ffifasteners.com/

D Head Nail Making Machine

+

+

Other products