Birch Plywood For Laser Cutting, 4x8 feet.

Core: birch

Face & Back: birch veneer

Thicknessof birch veneer, 0.3mm 0.5mm 1mm

Glue: WBP Phenolic, E0, E1, E2, As your required.

1. Face/Back: no patch, no split, no pin or no discolor.

2. Core: is hot pressed three times, sanded three times and maked up. So it is absolutely flat.

3. Moisture: less than 12%. Drying to make sure the proper moisture content and it won't produce disformation.

4. High bending strength, strong nail holding.

5. Suitable function is for family decoration and furniture making.

6. No color contamination between the conceret and shuttering board.

7. Heat resisitant, acid resistant, environmental protection.

8. No chipcore, no knots, no splits and no color differences and little coefficient of expansion.

https://www.kimplywood.com/